A defensible digital radiography comparison begins with a narrow list of measurable criteria and evidence sources, not with a marketing feature matrix. The most useful procurement evaluation starts by defining what constitutes an acceptable image chain for your facility: physical tests covered by the American Association of Physicists in Medicine (AAPM), required DICOM transactions, and post-installation indicators that can be audited against the contract [1][3]. That definition then becomes the substrate for comparing candidate systems. Vendor claims about dose, artificial intelligence, and total cost of ownership should be treated as hypotheses to verify during site visits and acceptance testing [2]. Without a clearly defined, verifiable endpoint for each criterion, committees are left comparing different measurements under the same label. The sections below describe how to structure a comparison around decision points that leave a trace: interoperability, image quality and dose, clinical workflow, and cost.
Interoperability as a binding comparison criterion
Start with the digital handoff rather than the detector. For U.S. health systems using federal procurement expectations as a reference, the Joint VA/DoD DICOM Conformance Requirements for Digital Acquisition Modalities, Version 3.3 dated December 2024, specify that DICOM Verification, Modality Worklist, and Storage services are mandated for all new purchases of radiology, dental, and ophthalmic digital acquisition modality equipment [3]. The same document states that all new models must have DICOM capabilities verified by Internet testing with the VA prior to being purchased [3]. Procurement teams outside those agencies can use the conformance checklist structure even where the mandate does not apply [3].
AAPM Task Group 150 frames acceptance testing as a two-part goal: confirm that the delivered system meets the manufacturer's specifications from the purchase process, and validate that the system is prepared for clinical use [1]. Both goals require original data access. The task group notes that the NEMA Standard XR 30-2016 includes a provision that equipment provide access to and export of original acquired image data in a non-proprietary format [1]. A comparison should therefore ask whether a vendor demonstrates export capability during evaluation rather than promises it after installation. Manufacturers' DICOM conformance statements remain primary evidence for each candidate [1].
Mapping the image quality and dose chain
For comparison purposes, separate the detectors' technical pathway from the displayed image. The ASRT white paper Best Practices in Digital Radiography describes four acquisition pathways: computed radiography with a photostimulable phosphor plate, DR with a CCD using indirect conversion, DR flat panel with indirect conversion, and DR flat panel with direct conversion [4]. Each pathway converts the remnant x-ray beam to signal differently, which means that two units described as "DR" may not be equivalent because the technologies behind that label differ [4]. Procurement teams should request the detector architecture and specify which pathway is acceptable for their clinical volume and mix under consideration [4].
Dose and image quality should be evaluated through the exposure indicator (EI) and its deviation index rather than through isolated numeric claims. The ASRT table shows that vendors differ in indicator names but that all comply with IEC 62494-1 regarding numerical expression in DICOM data [4]. GE HealthCare markets a Detector Exposure Index (DEI) with a direct detector exposure relationship; Fuji offers an S value, where S is inverse, or an EI based on customer preference [4][5]. A quality comparison should request the image acquisition details specified by the ACR practice parameter: tube potential, tube current, exposure time, beam filtration, source-to-image distance, EI, and target exposure index [8]. These standardized fields allow cross-vendor comparison of actual acquisition conditions [8].
Hypothetical acceptance test run for one criterion
One approach is to stage a short acceptance simulation during evaluation. For a candidate detector, set a predetermined exposure indicator target and request DICOM headers showing the acquisition details specified by the ACR practice parameter: kV, mA, exposure time, filtration, source-to-image distance, and exposure indicator [8]. This suggestion is an example workflow, not a recommendation to substitute for formal physics testing. The output should be assessed by a qualified medical physicist against the manufacturer's specification and institutionally accepted image quality criteria [1][8].
The simulation only demonstrates whether the vendor can produce accessible metadata and repeatable exposure behavior under controlled conditions. It cannot establish clinical equivalence, long-term reliability, or dose optimization across patient populations. Those questions require the vendor's DICOM conformance statement, site observation, and continuation through standard acceptance testing after installation [1][2].
Evaluating workflow evidence rather than automation adjectives
Workflow claims should be evaluated in a clinical setting that resembles the purchasing organization's actual use. GE HealthCare's radiography buyer's guide recommends that prospective buyers visit a facility using the equipment under consideration, observe normal interaction with the machine, and bring a technologist to provide input from a critical stakeholder [2]. That guide also describes a headquarters or virtual visit as a way for buyers to interact with product development, engineering, service, and sales during evaluation [2]. These suggestions are vendor-aligned and should be treated as a method for seeing equipment operation, not as evidence of superiority over alternatives [2].
Risk review for artificial intelligence in image processing involves more than confirming that a feature exists. A GE HealthCare guide for radiography buyers proposes specific questions for committees to ask: whether the algorithms introduce image artifacts, whether they can be configured to achieve the desired image appearance, how the look changes with dose or positioning changes, and how metal artifacts are mitigated [6]. The source frames these as questions prospective vendors should answer. Procurement teams can convert that list into side-by-side evidence from separate vendors [6]. An evaluation should document responses in writing and observe image appearance in the same clinical scenarios.
Total cost of ownership and service evidence
Total cost of ownership should be modeled with respect to the specific facility construction and service intervals, not as an abstract number. GE HealthCare's guide notes that construction requirements can substantially affect price and should influence the new-versus-upgrade decision [2]. The same source presents average price ranges for digital X-ray systems, but those are vendor-provided figures and should not be treated as independent market benchmarks by a procurement committee [2]. The buyer's guide also recommends asking whether suppliers perform preventative maintenance and yearly inspections, and whether they offer remote performance monitoring to help avoid problems before they affect availability [2]. These variables should be requested as contractual commitments for each candidate.
For existing technology, mapping retrofit paths can prevent an invalid comparison. GE HealthCare's radiography guide advises buyers to determine whether an older model will meet current and future clinical needs, noting that existing machines are rebuilt and certified to varying quality standards [2]. That distinction means an upgrade offer cannot be compared to a new system without a documented specification comparison for the specific installed unit [2]. In contrast, site observations at an older model do not establish the performance of new vendor technology; committees should require evidence from the same configuration being referenced.
Sources & references
- Acceptance Testing and Quality Control of Digital ... · www.aapm.org
- Key considerations in digital X-ray today · www.gehealthcare.com
- Joint VA / DoD DICOM Conformance Requirements for Digital Acquisition Modalities · www.va.gov
- Best Practices in Digital Radiography · www.asrt.org
- Final Draft for Layout · www.asrt.org
- Radiography Buyer’s Guide · www.gehealthcare.com
- Digital Radiography Systems - Siemens Healthineers · www.siemens-healthineers.com
- ACR–AAPM–SIIM–SPR PRACTICE PARAMETER FOR DIGITAL RADIOGRAPHY · gravitas.acr.org